FHC1900RC
Remanufactured Shampaine 1900RC Operating Room Table
Description
Height 28” to 44”, trendelenburg up 25 degrees, reverse trendelenburg up 25 degrees, back section adjustable to 30 degrees below horizontal, kidney elevator extendable up to 4”, leg section is adjustable from 92 degrees below horizontal to 70 degrees above, 14” longitudinal slide of table top, and headrest section is adjustable from 90 degrees below horizontal to 45 degrees above in 15 degree increments, 72”L x 21.75”W.
The Shampaine radi-op 1900RC is a completely C-arm compatible general surgery table that offers head-to-foot table top slide capabilities to accommodate a wide range of fluoroscopic procedures. The standard accessories included with this table are a full set of conductive cushions and standard head rest. the standard features of radi-op tables include a longitudinal sliding tops for increased c-arm and surgical access to patients, 4" kidney elevator, leg section that folds down under 103°, and precise positioning capabilities compatible with both ceiling mounted and portable image transfers.
All table surfaces are fabricated from radio-translucent and conductive panels, which conform to radiation specifications. A cassette tunnel is incorporated into each of the five table top sections allowing positioning of X-ray cassettes up to 14" x 17".
Dimensions: 72" long (86" with removable leg extension) 19 ¾" wide (21 ¾" with side rails), and 28" to 44" high. Trendelenburg up to 25°. Reverse trendelenburg up to 25°. Lateral tilt up to 17° right or left. Back section is adjustable 30° below horizontal and 90° below horizontal. Kidney elevator is expendable up to 4". Leg section is adjustable from 92° below horizontal and 70° above. Headrest section is adjustable from 90° below horizontal and 45° above in 15° increments
Electrical: the motor requires 117 volts, single phase, 60 hz power at 8 amp. Designed for use in non-flammable and non-hazardous anesthetizing locations.
LOAD LIMIT 350 LBS
|
