FHC2080L
Remanufactured AMSCO 2080L Electro-Hydraulic Operating Room Table
DESCRIPTION:
AMSCO REMANUFACTURED 2080L ELECTRO-HYDRAULIC CONTROL OPERATING ROOM TABLE; HI-LOW 27" TO 45", TRENDELENBURG 0 TO 20 DEGREES, REVERSE TRENDELENBURG 0 TO 20 DEGREES, TILT O TO 10 DEGREES RIGHT OR LEFT, HEAD SECTION 0 TO 90 DEGREES, FLEX 0 TO 20 DEGREES, REFLEX 0 TO 15 DEGREES, LEG SECTION 0 TO 105 DEGREES, KIDNEY ELEVATOR APPROX 4 1/2". WEIGHT CAPACITY 300 LBS.
BASE:
CAST IRON WITH TEXTURED ENAMEL FINISH. THE TOP IS ENCLOSED BY WELDED STAINLESS STEEL COVER THAT ALSO FORMS A SHROUD FOR THE LOWER PORTION OF THE PEDESTAL. A SWIVEL CASTER AND HEIGHT-ADJUSTABLE FLOOR LOCK AT EACH CORNER ARE ACTUATED BY SINGLE PEDAL. BOTH ARE ELECTRICALLY CONDUCTIVE, CONFORMING WITH APPLICABLE REQUIREMENTS OF NFPA'S PUBLICATION, FLAMMABLE ANESTHETICS CODE. THE BASE PROVIDES COMFORTABLE TOE SPACE ON BOTH SIDES AS WELL AS SPACE TO FREELY INSERT A FLAT-BLADE MAYO STAND. THE BASE ALSO CONTAINS THE HYDRAULIC SYSTEM. A NFPA-APPROVED PATIENT GROUNDING RECEPTACLE IS PROVIDED AT FOOT-END OF BASE,
PEDESTAL:
INCLUDES TABLETOP LIFT CYLINDER AND SUPPORT COLUMN WITH BEARING-MOUNTED SADDLE FRAME/ THESE ARE FULLY ENCLOSED BY STAINLESS STEEL, TELESCOPING SHROUDS. EACH SHROUD IS ONE-PIECE CONSTRUCTION TO ENSURE AGAINST FOREIGN MATTER ENTERING THE ELEVATING MECHANISM.
SUPERSTRUCTURE:
INCLUDES BEARING-MOUNTED GEARS FOR POSITIONING AND ARTICULATING THE TABLETOP. THE FRAME IS CAST ALUMINUM FINISHED WITH TEXTURED ENAMEL PAINT. THE SUPERSTRUCTURE IS BEARING-MOUNTED TO THE ELEVATING MECHANISM. INDICATORS SHOW DEGREE OF LATERAL TILT AND TRENDELENBURG. POSITIONING MECHANISMS ARE FULLY ENCLOSED BY STAINLESS STEEL COVERS TO PREVENT ENMESHMENT OF DRAPES.
TABLE:
THE 20" (508 MM) WIDE TABLETOP IS DIVIDED INTO FOUR HINGED SECTIONS: HEAD, BACK, SEAT AND FOOT. EACH SECTION IS CAST ALUMINUM (BACK, SEAT AND FOOT SECTIONS ARE COVERED BY STAINLESS STEEL VENEER). DRILLED HOLES ARE INCLUDED FOR THE OPTIONAL RADIO GRAPHIC TOP. STAINLESS-*STEEL SIDE RAILS, NOTCHED TO RECEIVE OPTIONAL ACCESSORIES, EXTEND TO FULL LENGTH. MOUNTING HARDWARE AND A FULL COMPLEMENT OF OPTIONAL ACCESSORIES ARE AVAILABLE.
| PERFORMANCE CAPABILITIES |
| TABLE COMPONENT |
POSITION STARTING WITH SUPERSTRUCTURE HORIZONTAL |
RANGE |
TOP AND SUPERSTRUCTURE |
RAISE - LOWER |
TO ANY POINT WITH 27 - 45 IN
ABOVE THE FLOOR |
| |
TRENDELENBURG ( HEAD - DOWN) |
0 - 20 |
| |
REVERSE TRENDELENBURG (HEAD UP) |
0 - 20 |
| |
TILT TO RIGHT |
0 - 10 |
| |
TILT TO LEFT |
0 - 10 |
| HEAD SECTION |
RAISE (FROM HORIZONTAL) |
0 - 90 |
| |
LOWER (FROM HORIZONTAL) |
0 - 90 |
| BACK SECTION |
RAISE |
0 - 90 |
| |
LOWER |
0 - 10 |
| |
FLEX |
0 - 15 |
| |
REFLEX |
0 - 10 |
| SEAT SECTION |
FLEX |
0 - 20 |
| |
REFLEX |
0 - 15 |
| FOOT SECTION |
LOWER (WITH SEAT SECTION HORIZONTAL) |
0 - 105 |
| KIDNEY ELEVATOR |
RAISE (FROM TABLETOP LEVEL) |
APPROXIMATELY 4.5" (114 MM) |
|
