|
Surgical Lights
|
 |
 |
FHC Visionary O.R. Light
FHC Visionary O.R. Light
Illuminance measured at a distance of 1m (39.4 inches): 90,000 Lux (8300 footcandles)
Color temperature: 4200ēK
Diameter of lighthead: 20 Inches (51 cm)
Light field: 8 - 10 inches (206 mm - 255mm)
Depth of field without refocusing: 22 inches (56 cm)
CRI (Color Rendering Index): 98
Focusing: Adjustable via handle rotation
Dimming: Continuous dimming (not discrete)
Rotation: Unlimited (continuous) without stops
Sterilizable handle: Sterilizable handle locks into position with one hand
Number of bulbs: 4
Light sources (halogen): (4) 35 watts, 24 volts (each); wired in parallel for continuous light output
Life of halogen lamp: 1000 hours
Heat emission: Significantly below IEC recommended limit of 10w/m2 at highest intensity
Swivel radius of lamp housing-ceiling mounted: 54 inches (137 cm) to center of lamp head
Height adjustment of lamp housing-ceiling mounted: 47 inches (119 cm)
Power (light bulbs): 140 watts
Electrical system standard: UL 60601-1
Mounting options: Single ceiling, dual ceiling
Total weight: Single: 61 lbs. (28kg); double: 105 lbs. (48 kg); lighthead with yoke: 20 lbs. (9.1 kg)
Type of bulb: 35W, BA15d base: 24 volts, cc-8 halogen
Power requirements: 115 Volt model standard, 230 volt model available
Seismic calculations available: Yes
Bulb change mechanism: Changes from front with Phillips head screw driver
Product warranty: One year labor and three year parts
Applications: Operating Room, Emergency Room, Trauma Center, Surgery Center, LDR, Cath Lab, Outpatient Surgery, Plastic Surgery, Ophthalmology & Surgery Suites
Accessories/Replacement Parts/APS (emergency power): Visionary bulbs, sterilizable handles and handle covers are available for purchase. Contact FHC for more information on APS units
Ceiling height accommodation: 8.5' - 10' (2.3 m - 3.1 m) contact FHC for pricing and installation options on lower or higher ceiling heights.
Note: The optical data are nominal values based on measurements calculated according to UL/IEC performance standards at 120V
|
|
|
