Electrosurgical Units

WEIGHT AND DIMENSIONS
HEIGHT: 8" (20 CM)
WIDTH: 13" (33 CM)
LENGTH: 21" (53 CM)
WEIGHT: 23 LBS (10.4 KG)

OUTPUT WAVE FORMS
CUT: 510 KHZ
BLEND 1: 510 KHZ SINUSOIDAL BURSTS AT 50% DUTY CYCLE RECURRING AT 31 KHZ
BLEND 2: 510 KHZ SINUSOIDAL BURSTS AT 37.5% DUTY CYCLE RECURRING AT 31 KHZ
BLEND 3: 510 KHZ SINUSOIDAL BURSTS AT 25% DUTY CYCLE RECURRING AT 31 KHZ
COAG: 510 DAMPED SINUSOIDAL BURSTS WITH A REPETITION FREQUENCY OF 31 KHZ
LOW VOLTAGE COAG: 510 KHZ SINUSOIDAL BURSTS AT 25% DUTY CYCLE RECURRING AT 31 KHZ
BIPOLAR: 510 KHZ SINUSOID

OUTPUT POWER CHANGES BY LESS THAN 5% OR 5 WATTS, WHICHEVER IS GREATER, AS THE LINE VOLTAGE VARIES FROM 85-135 VOLTS (INTO A 300 OHM LOAD).

LOW FREQUENCY LEAKAGE (50-60 HZ)
SOURCE CURRENT, PATIENT LEADS, ALL OUTPUTS TIED TOGETHER.

• NORMAL POLARITY, INTACT CHASSIS GROUND <10 µA
  
• NORMAL POLARITY, GROUND OPEN <100 µA
  
• REVERSE POLARITY, GROUND OPEN <100 µA
  
• SINK CURRENT, 140V APPLIED, ALL INPUTS <150 µA
  

HIGH FREQUENCY LEAKAGE
LESS THAN 150 MA RMS

INPUT POWER REQUIREMENTS
OPERATING RANGE IS 85 TO 135 AC VOLTS. CURRENT IS LESS THAN 8 AMPERES IN CUT AND LESS THAN 4 AMPERES IN COAG.

POWER READOUTS
AGREE WITH ACTUAL POWER INTO RATED LOAD TO WITHIN ± 15% OR 5 WATTS, WHICH EVER IS GREATER.

ADAPTIVE REM™ SYSTEM
MEASUREMENT FREQUENCY: 140 KHZ ± 20 KHZ
MEASUREMENT CURRENT: 3 MA MAXIMUM
ACCEPTABLE RESISTANCE RANGES:
        REM™ PAD - 5-135 OHMS
        NON-REM™ PAD - LESS THAN 20 OHMS

ACCEPTANCE RANGE IS 5-135 OHMS AFTER REM™ POLYHESIVE™ II RETURN ELECTRODE IS APPLIES. REM™ TRIP IS INITIAL IMPEDANCE PLUS 40%. FOR EXAMPLE, IF THE INITIAL IMPEDANCE IS 30 OHMS, THE UPPER LEVEL TRIP IS APPROXIMATELY 42 OHMS.

COOLING
CONVECTION, NO FAN

AUDIO VOLUME
THE MODE INDICATOR TONES ARE ADJUSTABLE TO A MINIMUM LEVEL OF 45 DB AT 1 METER. THE ALARM TONES ARE NOT ADJUSTABLE AND ARE SET AT 65 DB MINIMUM AT 1 METER