Modulus II Anesthesia Machine w/Vaporizor
THE MODULUS II SYSTEM IS A GAS DELIVERY SYSTEM WITH INTEGRATED ELECTRONICS AND MONITORING. PROVIDING UP TO THREE GASES (OXYGEN, NITROUS OXIDE, AND OPTIONAL THIRD GAS SELECTION). THE MODULUS II SYSTEM INCORPORATES THE SELECATEC SM MANIFOLD FOR UP TO THREE CYPRANE TEC 4 VAPORIZERS. THE MODULUS II GAS DELIVERY SYSTEM ALSO INCLUDES, AS STANDARD EQUIPMENT, THE OHIO 5100 OXYGEN MONITOR, AND OHIO 5400 VOLUME MONITOR, INTEGRATED WITH THE BASIC MACHINE ELECTRONICS PACKAGE. THE MODULUS II GAS DELIVERY SYSTEM CAN ALSO BE EQUIPPED WITH THE OPTIONAL OHIO 7000 ELECTRONIC VENTILATOR AND OHIO MODEL 2110 ADULT / PEDIATRIC NON-INVASIVE BLOOD PRESSURE MONITOR.
STANDARD FEATURES:
-
DOUBLE FLOW METER TUBES (O2 & N2O)
-
FLOW METER PROTECTION SHIELD
-
GUARDED OXYGEN FLUSH
-
MIDDLE SHELF
-
LINK-25 HYPOXIC GUARD
-
"TILT" TOP SHELF
-
TOUCH-CODED OXYGEN KNOB
-
MONITOR "SWIVEL" POD
-
OXYGEN SUPPLY PRESSURE SENSOR / ALARM
-
5400 VOLUME MONITOR
-
5100 OXYGEN MONITOR
-
OXYGEN SUPPLY PRESSURE FAILURE DEVICE
-
A.C. LINE POWER SENSOR / ALARM
-
ELECTRICAL OUTLET PANEL
-
D.C. POWER SENSOR / INDICATOR
-
OXYGEN POWER OUTLET
-
SELECTATEC 3 VAPORIZER SM MANIFOLD
-
HIGH-PRESSURE HOSE HANGER
-
MINIMUM OXYGEN FLOW
-
CENTRALIZED PATIENT INTERFACE PANEL
-
ANTI-DISCONNECT FRESH GAS OUTLET
-
SHELF-MOUNTED UTILITY HOOKS
-
3 DRAWER LOCKABLE CABINET
-
ANESTHETIC BOTTLE HOLDER
-
INTEGRAL FOOTREST
-
"TELESCOPING" ABSORBER ARM
-
INTEGRATED D.I.S.S PIPELINE INLETS
-
"LOCKABLE" FRONT CASTERS
-
MODULAR OXYGEN & NITROUS OXIDE YOKES
-
MONITOR SECURING STRAPS
-
HIGH PRESSURE REGULATOR AND GAUGES
-
7800 VENTILATOR
-
PNEUMATIC / ELECTRIC INTERFACE MAIN SWITCH
-
BATTERY BACK-UP OF THE VENTILATOR
-
O2 AND N2O (STANDARD)
-
AIR (OPTIONAL)
-
HYPOXIC GUARD (STANDARD)
-
STANDARD WITH OHMEDA 7000 VENTILATOR
-
COMPATIBLE WITH TEC IV, V OR VI VAPORIZERS (OPTIONAL)
-
OXYGEN AND VOLUME MONITORING (STANDARD)
-
OPTIONAL INTEGRATED PULSE OXIMETRY, ENDTIDLE CO2
-
GMS CO2 ABSORBER (STANDARD)
-
DRAWER PACK CONFIGURATIONS MAY VARY
WEIGHT: 360 LB. (163 KG) MINIMUM (WITHOUT MONITORS ON SHELVES); 477 LB (217 KG) MAXIMUM (WITH MONITORS ON SHELVES)
HEIGHT: 61" (155 CM)
WIDTH: 32.5" (83 CM) OR 34.5" (88 CM) W/HANDLE
DEPTH: 25.2" (64 CM)
STATIONARY SHELF:
HEIGHT FROM FLOOR: 50" (127 CM)
MAX. SHELF LOAD: 25 LB (11.3 KG)
SIZE: 14.7" X 12" (37 CM X 30 CM)
USABLE HEIGHT: 10" (25 CM) MINIMUM; 10.5" (17 CM) MAXIMUM
TILTING (TOP) SHELF:
HEIGHT FROM FLOOR: 61.1" (255.3 CM)
MAX. SHELF LOAD: 60 LBS (27.2 KG)
SIZE: 32.4 X 15" (38 X 82 CM)
TABLE TOP:
HEIGHT FROM FLOOR: 61.1" (155.3 CM)
MAX. SHELF LOAD: 60LB (27.2 KG)
SIZE: 32.4" X 15" (38 CM X 82 CM)
TABLE TOP:
HEIGHT FROM FLOOR: 32.5" (82.5 CM)
SIZE: 25" X 15" (68.5 CM X 38.1 CM)
DRAWER CABINET: CONTAINS THREE 14" (35.5) DEEP, 15" (38 CM) WIDE, BALL RUBBER LINED, BALL BEARING SLID DRAWERS. ONE DRAWER 8" (20.3 CM) HIGH. TWO DRAWERS ARE 4" (10.1 CM) HIGH
ABSORBER POST MOUNTING ASSEMBLY:
ABSORBER SWIVEL ARM LENGTH: 14" (35.5 CM)
PUSH BUTTON VERTICAL ADJUSTMENT: 10" TO 26" (25.4 TO 66 CM) FROM FLOOR
RANGE OF HORIZONTAL ADJUSTMENT: 6.5" MIN; 11" MAX
COMMON GAS OUTLET
EQUIPPED WITH LATCHING, POSITIVE ENGAGEMENT, BAYONET TYPE CONNECTOR. THE COMMON GAS OUTLET CONNECTOR WILL ALSO ACCEPT STANDARD 22 MM ID OR 15 MM OD TAPERED FRCTION FIT CONNECTORS.
|
