FHC Excalibur Plus Electrosurgical Generator

FHC Excalibur Plus Electrosurgical Generator

FHC-EXCALIBUR+
FHC Excalibur Plus Electrosurgical Generator

MAINS OVERCURRENT PROTECTION:
3AG 10A fuse in 115V position. 5X20MM 4A quick acting/high breaking fuse in 230V position.

MAINS FREQUENCY LEAKAGE:
(PER UL 544) PATIENT CONNECTIONS TO NEUTRAL: Less than 10 µA typical.

CHASSIS TO NEUTRAL: Less than 25 µA typical.

POWER DISPLAY ACCURACY:
The greater of +/- 10% of display or +/- 3 watts rated load.

LINE REGULATION:
Power change < 1%/V for vline = min to max voltage.

DUTY CYCLE: 15S on, 30S idle

OPERATING CONDITIONS: 10°C to 30°C, 95% RH non-condensing

MOUNTING RESTRICTIONS: 2" (5 CM) clearance required on each side of unit for cooling.

PAD MONITOR
SINGLE PAD MODE: two wire continuity detector, typical threshold= 10 OHMS
DUAL PAD MODE: Two wire resistance monitor, typical acceptance range 10 to 150 OHMS, trip threshold typically 20% higher than the last monitor set point activation, visual indication of patient resistance.

SOUND FREQUENCIES:
CUT = 520 HZ
COAG = 400 HZ
OPERATOR ERROR = 1710 HZ, pulsating
PLATE ALARM = 1000 HZ (65 DBA minimum)
MACHINE FAULT = 1000 HZ (45 DBA MIN except alarms are 65 DBA MIN)

WEIGHT: 40 LB (18.1 KG)
HEIGHT: 6.25" (15.9 CM)
WIDTH: 15.9" (40.4 CM)
DEPTH: 22.75" (57.8 CM)

MODE	MAX POWER (WATTS)	RATED LOAD (OHMS)	TYPICAL CREST FACTOR	MAX OPEN CIRCUIT VOLTAGE (P-P)	CARRIER REQ. (KHZ)	PULSE REPETITION FREQ (KHZ)
MONOPOLAR
PURE CUT	300	300	1.7 - 1.9	2000	416.7	CONTINUOUS
BLEND 1 CUT	180	300	2.3 - 2.5	2000	416.7	20.0
BLEND 2 CUT	120	300	2.9 - 3.2	2200	416.7	20.0
BLEND 3 CUT	80	300	3.6 - 4.0	2400	416.7	20.0
STD COAG	120	300	6.2 - 6.5	6500	540	40.0
SPARY COAG	80	500	8.0 - 9.0	10500	540	20.0
BIPOLAR
CUT	50	50	1.6 - 1.8	400	1000	CONTINUOUS
COAG	50	50	1.5 - 12.0	400	1050	20.0
			BIPOLAR COAG CREST FACTOR DECREASES WITH POWER SETTING

To contact us please call our toll-free number at 888-282-8644, local number at 407-322-3672 or fill out and submit this form. * indicates required
* Name:
* Address:
* City:
* State:
* Zip/Postal Code:
Country:
Phone:
Fax:
* E-mail:
Are you interested in receiving emails for upcoming product specials?:	Yes

* Write the characters in the image above
Your Comments and Questions:

Future Health Concepts
1211 30th Street
Sanford, FL 32773
Email: Sales| Parts and Service

Phone:	1-888-282-8644
	1-407-322-3672
Fax:	1-407-322-3871

Home | Site Map | About Us | News | Contact Us

Electrosurgical Units

FHC Excalibur Plus Electrosurgical Generator